ALL Broadhead TUNING Questions Answered + Dan's 2022 FINAL ARROW SELECTION

do you see an elevation difference with BH at very long range from tuning or just from BH drag? always seemed that even with a well tuned bow, my BHs will tend to favor low after 70

Great video! Thank you 🙏

Have you ever used the day six evo broadhead to harvest an animal? if so how did it perform?

Talking about to weak of spine for the weight up front . I have 30” draw an pull 68# with A 29 1/2 arrow I shoot 125 heads on a 300 spine what max insert weight I can add without being to weak . In your opinion lol.

Thank you for this. Perfect timing

Full circle right back to RIP TKOs I see…Been back ordered for the past 8 months here in Canada. What was your opinion on the 4mm Axis? Really need to get my moose arrows dialed in before season starts. Will be shooting 125 QAD Exodus full blade.

Right hand shooter and my broadheads are hitting 2-3” right of my field points any advice? Bow was bought new and setup by SVA beginning of the year. Arrow is a rip tko 250 spine 495 grain total weight. Check nock pinch it has ever so slight movement.

Isn't the "Gold tip trad 600 quarter-sert" actually a half out insert like the Victory Shok half out's? Wondering why you chose the Gold Tip over Victory or instead going with HIT insert with a collar?

What release were you running

Dan's 109 yard group is better than my 50 yard group lol

Good vid Dan. Let us know how that Elk arrow works out.. Do a necropsy if possible.

Will moving the rest to get the broad head to hit the same place as the field point affect the paper tune

Great video as usual!!! What weight are those Iron Will???

Thanks for the content.

Comment for Josh about the draw board...straight line pull VS staggered pull. Would like to hear more about this. You made mention of one of your videos, but I can't find one dedicated to the subject - were you just referring to the fact that we see your staggered draw board in the video?

Think it's funny I have the same deer hunting arrow setup, minus the fletchings and the broadhead weight (I use the 100gr version).

Would love to hear what MFJJ has to say about vane selection / configuration for different broadhead sizes & weights.

This year I bare shaft tuned my bow out to 40 yards before broadhead tuning (so I know it wasn't a wheeling or timing issue). I was getting left BH impact of my FP when I started checking my broadheads. I ended up going from a 3-Fletch Max Stealth to a 4-Fletch Max Hunter to see if it was a steering issue. I'm shooting a 150 grain VPA 3-Blade head this year, which is the heaviest head I've ever shot. Anyway, that change in vane setup fixed my issue, but I'm no expert and didn't test a ton of different configurations. My arrows is noticeably louder now too, hopefully it wont be an issue.

Left or right you move the rest towards the broadhead, I just did it. Your field point will move towards the broadhead, you'll have to move the sight later but you want both to group together.

I would be interested to see the same breakdown but for bare shaft vs field point for 3d / target

Sweet gorillaz stule MFJJ!

Was their noticeable flight differences between the Max Stealth and Max Hunter with an Iron Will on the tip?

If you bare shaft tune,nock tune and are shooting bullet holes. And bare shafts are hitting the same as fletched arrows at 20. Why would you move anything,if my broadheads are only hitting a inch or so why not just move sights. I wouldn’t think moving your sights would detune anything.

EXTREMELY helpful, guys.

Dan...why aren't you shooting the FF SK-2 that JJ and TC are shooting instead of the AAE Max Hunter? Did you by chance test them with your Iron Will's?

Archery is so complex! And MFJJ is a genius!

Hey guys....if you bareshaft tune first......99.9% of the time that's all you need for broadheads to fly perfect.

Awesome video but I disagree with Josh. If bh impacts left of fp, then you bump your rest to the left. I make most of the correction with yolk tuning on my bowtech and final touches on the rest. Have just gone through this exercise. Goldtip tuning guide also confirms this method.

So what your saying is me lobbying left overs arrows and the cheapest amazon 6 pack broadhead I can get, isnt the right way? But if it works, is it really wrong? Good stuff

So I’ve tried a lot of different movements and I cannot get rid of a high left impact from my broadheads I shoot a solution ss 60 lbs in comfort mode 31” draw length right handed full length victory xv gamers .350 spine I squared everything and everything is spinning true. I’m running a black eagle 49 gn ss insert and a 125 grain slick trick 4 blade total arrow weight is 409 do you all have any recommendations?

What’s the length of the exposed portion of the half outsert of the gold tip insert. I can’t seem to find product dimensions anywhere? Thanks!

I've barely learned how to shoot and I've watched so many of your videos that get way more technical than my skill level, but it's still good stuff.

Where can I get those inserts ?

I assume you would nock tune every broad head correct?

What is the difference between a crossbow broadhead and irregular Broadhead

Thank you guys helping me so much my first year bow I’m not touching a gun this year 🙌🏻🙌🏻

Great except to music lol...🤘🏻

What are you drawing!?? Woah! Lolol 🤣😂🤣

So what does it mean when I shoot a broadhead 4 inches low at 20 I turn the nock 180 degrees and it shoots perfect now. I've done that on all my arrows seems to work.

Great video as always. I guess reading all the comments confused me. I'm shooting right w broadheads from field points, never had that issue before but these are solid QAD Exodus heads so I can understand. My question is, should I move the rest left as in description or was that corrected and thus why comments below are different? Thanks guys.

Dan, whats your thoughts on Grimreaper razortip 1 3/8 or proseries 1 3/8 for whitetail? Thanks

Is the key to easy broadhead removal shooting over 100 yards lmao

Ok,...I'll be watching this several times,.........amazing info!!

What did you use for the insert and sleeve on the riptko

Can’t wait to see you TAC

Can I use 125 grain sevr for elk?

Man this was so helpful. Ran lighted noccks last year and could not figure out why they wouldn't tune. Now I know. Thank you thank you

U use to complain about single bevel now your gonna shoot them lol.

My gosh. Josh says the opposite thing on lefts and rights every broadhead tuning video he does. 😆. have him put out a video telling everyone the CORRECT way. Follow the BH on L/R. BH hits right of FP means tail left means move rest RIGHT.

Single bevel is a scam. It’s lower manufacturing cost, and easier sharpening. That’s it.