Комментарии:
Great review. Personally I’d stay away from Vevor. They sell a lot of junk and when you have problems they won’t take care of you.
ОтветитьI have a very similar planer, the "exhaust" port looks identical. A problem I often find with such a small diameter is wider boards and mostly softer woods tend to quickly clog it no matter what kind of vacuum you attach to it. Granted maybe it's a bit optimistic trying to plane 0.5mm off a 200+mm wide pine board, but still.
I'm surprised yours worked well, maybe it's a harder wood that separates into smaller chips?
"Fractions" was the word you were looking for?
ОтветитьLess than an optimal review. Your attitude was obvious from the start. Wow
ОтветитьSome rare earth magnets would work for holding the tools to the unit. I wouldn't worry too much about that...
ОтветитьVery interesting! I expected way more negatives, but you're saying the performance is comparable to a more expensive machine, even if some convenience and design considerations were not made.
As a hobbyist with no planner, this was very helpful.
Привет. Отличный аппарат.
ОтветитьThe best 2024 possible Cosmas.
Thanks for the review.
🌿
Some folks seems to review the review.
I wonder who writes their paycheck...
😱
hey vevor,
fuck off the planet take your bullshit products with you
Cosmas, I appreciate you speaking English in your videos which gives you a wider audience.
Unlike certain other comments, I think you gave a perfectly fine review of the Vevor, and its comparison to the Makita (one of the gold standards in planers). Your title seems a bit misleading, because your conclusion was that the Vevor is actually good, not "could have been but wasn't". The Makita is just a bit better in terms of construction & convenience--but probably not 200 Euros better. Thank you!
And the award for the best planer sound impression goes to: ?! :D Great review. There are too many reviews that just point out how every knob, button, lever and panel feels to be made from cheaper plastic than some more expensive alternatives, while this is actually the useful info.
Ответить1.5mm is basically 1/16 inch, which is an average depth of cut in the US. Their market is probably bigger in the US, so that's the screw pitch they selected.
ОтветитьHow to start a video the most annoying way possible 😂
ОтветитьGreat video. Thanks for sharing. What is the difference in Speed 1 and Speed 2? Is the cheaper single speed provided with Speed 1, Speed 2 or somewhere in between?
Ответитьimperial
ОтветитьSorry, Cosmas. I believe you have to use bananas measurements. 1.5 mm is 1/32 of an inch in bananas. An OK thing to us Americans.🤣🤣 Your experience was better than Mathias Wandels recent Vevor item.
ОтветитьWas really good to see a new video from you. They are always fantastic. Good job on the review,
ОтветитьIn my experiece this type of planer is good long as U treat it as a pawertool not as mashine.
U compare 600 to 400€ but no so long ago this vevor quality (is all the same- in Polish market we had same looking dedra, bass, toya, and som no name-, only makita dewalt and metabo ar a beter quality) cost round 200€, when dewalt and metabo cost 500, and makita 600. Today- after covid times- costs are no proportional.
In the end are all the same, and work long as work, and are cheap to replace. I work on those cheepest, I have therd dewalt, use makita and metabo. Good jobsite pawertools.
Lots of peaking in your audio. I'm hearing all sorts of clicks and pops on this video that other videos don't have.
ОтветитьYou got this for free, so don't forget to mark the video as containing a paid promotion. "In kind" gifts like this count as compensation.
ОтветитьVevor seems to be very aggressively marketing their products since many of the people I follow review them.
I myself got a rotary welding table.
Similar to your planer: some smaller things need to be improved, but it’s incredibly good for the low price. I wonder who will pay for that in the end, but I guess workers in the factory and nature… 😮😢
Hallo Cosmas, deine Videos auf bayerisch fand ich irgendwie auch immer als sehr ansprechend. Aber alles gut. schön dich zu sehen.
ОтветитьI think Metabo dh330 costs +- the same and is probably a better quality product. Thoughts?
ОтветитьHow about knive resharpening and additional knife availability?
ОтветитьHi
in the video you compare Vevor from what I can see with 3 knives with a 2-knife Makita. Is there a difference in the quality of planing?
There is no head lock in the Vevor. Is there a repeatable even board thickness?
Overall, would you buy this machine if it was at the same price as the Makita without paying attention to the comfort and the practical result?
Run away from it
ОтветитьI have this planer too, actually 2 bc the first one arrived damaged.. although vevor said it shouldnt matter for using it and offered me some money back i insisted on the safety and otherwise i would send it back under their 30 day no questions asked policy. So they just send me a new one and i could keep the damaged one for parts or something.
Only now i want to change the knives because the woods comes out with like cutting marks.
Only i have no clue how that works with this one.... I have replaced knives before on a jointer but here im struggling a bit... Also cant find any Vevor specific video for it....
U have any clue?
I Bought this machine, and i dont know always have a spine on the wood. I put a a wood and it has spince at the start and the end on the wood. Any idea how to remowe the spine?
ОтветитьThank you for the review.
I expected two see some comparison on the quality of the work, the speed, the power (at which depth each model gets stuck). How fast the blades get doll, etc.
When you buy/ get free a less expensive tool, do not expect top of the line things like tool storage. The 2mm per rotation was a frivolous complaint. You showed the gauge as being very readable, so read it. If 1.5 mm per revolution confuses you, you have bigger issues. Put magnets on top to hold tools, use a cheap bungee to secure the in-feed/out-feed tables for transport. It's a Vevor, not an overpriced Festool. Nearly all benchtop type thickness planers need some modification to even approach mid-range stationary tool results. Knowing that going in helps the focus on improving performance.
Ответить