Complete TP-Link Omada Setup Guide for Home (2022)

Is there a reason why my VLANS won't communicate with each other? I'm trying to ping from a machine on one VLAN to a machine on the main LAN and it wont work going either way. I know it was said in the video that all networks were able to communicate with each other by default, but mine aren't.

Does this work if you use the isp router instead of Omada? My isp does not support 3rd party routers.

Great video! Looking into setting up similar setup but with 200 clients for a small office network. What other hardware is needed to cater 200 clients?

I have the ER7206 router, SG2210P switch, and 4 EAP610 APs, 2 upstairs and two down. With just a single SSID based on my LAN, signal strength is great on all APs. When I setup a VLAN fir my IoT devices for wired and wireless with a separate SSID, I get no internet for . Ideas?

What is the Coverage Range of this AP in meters?

after change the oc200 ip address to static, it doesn't work properly... everytime is offline

This is almost like ubiquiti and i wonder how the radio frequencies combined together to resolve the environmental reactions caused by global warming due to high pressure sea ubderwater so seriously thinking about replacing I C E on top of Himalayan with 2 litres of water from italy may cause end of civilian wars in the ukrain and russia, people have to think twice before buying bad quality chocolates from non branded outlets under the ocean of the sky

Hi there. Very useful video Thank you. Quick question: I have a TL-SG2008P, an OC-200 and an ER-605. Can I user a Netgear nightwawk as the AP? Will it work? or do I need to buy also a TP Link AP?

I'm a little confused. Guest Lan has VLAN 40 just like its IP. kids Lan has VLAN 20 just like its IP so how come the main LAN is VLAN 1 but not 10?

Hi Stephano, i really like to build this set up at my home. I just bought eap235 wall AP, 2 pcs eap115 Wall AP, and eap110 AP and planning to buy some omada VPN router.. Just one question, i have old but still great TP Link poe+ switch, but it is unmanaged, can i still use it? What disadvantage not using Jetstream Omada Switch ?

Thank you for your kindly advise 🙏🏻

I'm new to all this and I'm working on updating my network at home and your videos have been very helpful, I wanted to ask how many wireless accounts you can have or create, if there is a limit.

Hi and thanks for the video. I have a very simple setup, the ER605 acting as a router for my single home LAN. I'm going crazy not able to block a fixed IP device within my LAN from inbound/outbound internet (WAN) connection. How can I do this using the ER605 admin panel? I previously owned the TL-R600VPN and this was very easy to do, but the admin panel of the ER605 changed completely and can't understand the Firewall's Access Control menu . Thanks

That's my last set up to complete everything and that part holding me back sorry I'm totally new on this but at the same time I'm been putting all my effort to keep leaning

With a poe switch can you change a poe port to a normal lan port? because i have some poe ports i dont use and i want to change it to a lan port

Great guide with step by step instructions. Thanks! Is there a way to share a printer between different vlans?

This worked great. Until yesterday. I had set this up for a small church several months ago ahead of an internet service installation. There was a backlog for the cable company so we were on "the waiting list." This was July 2022. So, I went ahead and installed 3 EAP225 and the ER605, OC200, and a TL-SG2218 and used an ethernet bridge connected to VZ hotspot to test; all systems worked perfectly. Then the wait. Yesterday, Cox came in like gangbusters and set up the wrong modem. I ordered a basic business modem, without router or wifi. See, the church wanted to rent the modem, since it was only $5 month. Lightning strikes are common here and more than one microwave and phone system has been fried at this location, so they figured they'd rather Cox be on the hook for a replacement. While I was out of the room the tech installed and configured the AIO modem. Had I seen him take it out of the box, I'd have stopped him. It shouldn't have been a problem, but the gods were angry yesterday. The tech left and came back with the right modem. Still, nothing worked right, not even wired connections. So, I reset all hardware to factory and started over. I tried clearing the routing tables, etc, praying, crying, but I gave up. I did the hard reset and followed your video again. Wired connections work now and work well, but the EAPs only connect to windows devices with no internet. Chrome, Android, and Mac devices throw DHCP errors and fail to connect Looks like the EAPs are not passing DHCP to any of those devices. I have since done hard resets to everything and I am getting the same results.

How do you get the switch to be a device instead of a client. When I set this system up it ended up as a client ???

Im a newbie, what’s the purpose of assigning addresses?

Can I use a Unifi access point with this setup?

Great video and setup. Only running into 1 problem. Controller keeps going back into adopting EAPs, switch and router. Any idea how to correct?

Hi, I think you have done an amazing job explaining the programming of the GUI and all the offerings that Omanda has with their new platform. I have installed several systems already.
The problem is, No one tells us how to separate the devices to the V-lans that you teach us how to set up. If I want to put all my IOT devices in a V-lan, I’m clueless. It seems it would be easy for a hard wired device, but not so easy with wireless.. Please advise.

BRB

Watching this at work, hopefully this helps when I try to troubleshoot it at home. I have everything connected, but it's weird because access point WiFi isn't connecting to the internet, so I think it's the VPN router. Oddly, I can only see one security camera on access point WiFi (even though it says it's not connected to the internet), so I think my other cameras might be connected straight to the modem, which is why I can see them on the modems wifi.

hi do you have video how to block wifi sharing in my er605 and oc200 wifi voucher thnks if you read my message..

Trying to decide between the Omada router vs getting a custom router and running Pfsense on it. What are the pro's/con's for the omada router you have discovered?

Do i need to buy the tp-link vpn router for the omada setup to work? I already have a really good router. Don't want to replace it.

Hi my question is can we also make a vlan gateway ip for each vlan without using omada controller?

This is far more complicated than I ever expected. I’ll be using this as a guide for sure. Sheesh

Wifi 6 ap hanging on a 1g link?

Very nice video, I wonder if you have something to explain how to share a NAS on to vlan's.
I have the ER7206 v1.0, OC200 and TL-SG3428X v1.0.

Thanks for this video. Is there a way you can block P2P websites and downloading using an ER605? Thank you.

I followed your guide exactly and every time I click on save I lose track of everything, I can't reconnect. I've reset everything and tried this several times but it always gets lost. Any ideas?

Hi, there is the router. Necessary because i got a home router

hello brother show how to reset Tplink EAP653

Thanks bro. I got the controller, the router, and the switch set up exactly as I wanted thanks to your video.

As a fan of the TP-Link Omada line, adding the hardware (even software) controller to your APs is truly an amazing experience. It makes your APs a mesh, and makes setup/adding a new AP around 5 clicks, less if you setup your SSIDs as default.
I've deployed 6 mesh networks for business customers of mine, and I am currently testing/deploying one in my home, keeping the Synology router (due to amazing, and free, content filtering (I've got kids)). Keep up the good work, TP-Link! My one request would be expanding a bit in your switch lineup, possibly a half PoE 48 port version with the 10 GbE ports. I've got a few clients where that would be a perfect fit.

Hi there, I see that on you configuration you don't get any issue when you change the ip range of the LAN. On my configuratuion, when I change the IP range, my netgear AP don't work anymore. I don't know whay. Can you please tell me, do I need to reset my AP to config again for that ? Thnx in advance>

I do not have the OC200 controller so Im using the software. Are the settings still in effect, specially th VLANS and the ACLs even if the software is not running?

Why is the IP address settings not showing on my switch? i can't change it

Does the ER605 have a DNS server, ER7206 doesn't?

Thanks!

What is the VPN router for? Can you use any other normal router? also, what is the controller for?

Do you have a similar video but instead of AP, one with a mesh system? By the way, what's the cost to have this system set up? Thank you for this video.

A bunch of crap this tp-link stuff :) Go have some fun with Mikrotik instead, you'll get more mileage and bang for your buck.

Thank you for this! Being a newbie into networking, I believe this is the first or only video I’ve seen that shows from the start of the equipment plugged in from your existing router and to the computer you’re using to set everything up! Kudos also for using a Mac instead of PC so now I know I don’t necessarily need a PC. I would like to know however if you’re still using your existing router or is your ISP now going directly to your WAN port on the TP-Link router? Thanks!

I'm curious about the way the kids VLAN is set up. If I set up the kids VLAN in this way, and block it from the rest of the networks (LAN, IPCAM, etc) would the kids' PCs be unable to connect to a minecraft server hosted on the LAN network?