Комментарии:
Lane Fords
ОтветитьCharlotte Shoal
ОтветитьKeeling Track
ОтветитьClark Mark Taylor Timothy Harris Robert
ОтветитьMiller Melissa Hernandez Kimberly Lewis David
ОтветитьHall Charles Lee Jeffrey Wilson Sandra
ОтветитьLee Ronald Thomas Mary Moore Maria
ОтветитьClark Dorothy Williams Christopher Wilson Scott
ОтветитьHad the previous model liked it a lot then got a AVA p57 love the cannon it’s brilliant had to buy the 1tr jug as the 0.5 one is a waste of time not used my mjcc cannon since buying the Ava
ОтветитьWorst review I've seen. More snow foam in bottle, turn the knob back...... its realy that simple. P.i.r will be right.
ОтветитьI’ve never had that issue great results apart from Mjjc foam shampoo use a quality American shampoo
ОтветитьCould you get a bigger orifice? I think you can buy a 1.35 orifice, the one that comes standard is 1.25 I think.
ОтветитьYou know there is an adjustment knob on top that lets you dial in the output dilution. So if it's too dry, just turn it down, and you'll get more water in the mix.
Ответитьi dont understand. adjust the water-foam ratio.
ОтветитьPantheorganizer is happy with it and imjoshv is happy with it so i am happy with it. Its a amazing product and the foam as you can see is amazing.
ОтветитьFool
ОтветитьYou do realize that you can add more water to the foam by the top knob? I mean if its to dry add water to the mix
Ответитьcant you adjust the foam to water ratio from the top tip?
ОтветитьReally interesting video ! I'm impressed with how you got the patience to reply to every ''turn the knob'' comments. I'm from Canada and I didn't know anything about PIR before I start using Touch-Less. Then I figured everything about how you do it in UK. People around here only care about shaving creme foam, but it really doesn't matter anymore with good product like Bilt Hamber. I now only use Touch-Less when the car is really dirty/dusty. No more Neutral PH snow foam before contact wash, I just use good lubrication shampoo like Carpro Reset don't see any issue. I saw some tests and you can apply Touch-Less straight liquid on the paint and get similar results. More foam doesn't always mean more cleaning power.
ОтветитьIt would take a fool to wash a car in the sun and seriously discuss quick-drying foam.🤦🏻♂
Ответитьmjjc is number one. You don't know shit, your other bottle is garbage
Ответить1) It wasn't clear, did you match the heads for flow so the actual PIR was matched?
2) Is this a case where you actually need to adjust the flow on the head using that knob?
😂
ОтветитьThat v3 has several knob full turns available for foam thickness adjustment
ОтветитьTotal BS
ОтветитьWhat if you increased the ratio of water to foam wash, that might increase the wetness of the foam spray?
ОтветитьWas this used with deionized water ?
ОтветитьReally interesting video, thanks for sharing your findings, rather than just going with the 'thick foam must be best' mantra. I'd be interested to see how it does with a weaker solution, and then possibly more applied? For example, if you used straight water (for explanation only), no matter how much the lance aerated the water, it wouldn't be dry, because it's just water. Why couldn't you then just add solution until you got the desired wetness?
ОтветитьI have one and I LOVE IT!!! 😍
ОтветитьI see everyone telling you the same thing (to turn the knob) and your response is the same (it dilutes it).
What you’re not considering is the mjjc gets more foam, by using more product. When you turn the knob to get a runnier solution you are diluting it, but to the same level as the other foam cannon. You’re comparing a more diluted foam to a lesser one, then you’re being dramatic about diluting the stronger one. It doesn’t make any sense my brother.
Also you could just use more product🤷🏻♀️
ALSO it only needs to dwell for so long. In fact dwell time is more important when you’re doing the contact wash as that extra soap provides lubricantion.
I'm sorry what your saying doesn't make sense. You determine the wetness with the adjustment knob.
ОтветитьI’m glad I came across this video. I use the foam cannon you recommend and was thinking to buy the MJJC. Now that I’ve seen your video I wonder if you were to turn the knob to decrease the use of car shampoo would create less foam? That wasn’t addressed and I wonder if that would create a thinner foam like it does using my MTM.
ОтветитьMJJC, what have you done!! I'm keeping my three v2 Pro ... I also have three MTM.
I don't even like the shape of the bottle on the v3.
Adjust your mixing knob if you don't like a thicker foam 🤷
ОтветитьMJJC is awesome, you want a different foam? just use a different Mesh Filter.
ОтветитьIn my opinion, a dryer foam means it's a lot more effective than the others that even of you want to, you can't achieve that dry foam. If it has a mixing option then it's up to you to choose what mix you want 😅 I have that exact same v3 and I love it, but if you have the v2 pro don't buy it because it's basically the same
ОтветитьFoam is not dry
ОтветитьYou are Not explaining that the Purpose of Thick Foam is a more activated soap.
Obviously if you shake your soap vigorous before wash it will Clean Better.
The Exact Same Applies to Foam Cannons.
In your Video you can even see the MJJC door Is Cleaner.
Your wayyyyyyy off here.
Twist a dial abit the other way, problem solved. You didnt have to go off and buy the outdated and overly expensive mtm
ОтветитьVery thorough test as always 👍
ОтветитьGreat video Adrian, I’ve actually got this cannon and use the BH auto foam in it, I run it at between 4% and 5% PIR, I do however turn down the mix by between 1/4 and 1/8 to help make the foam wetter and it seems to work for me. I am surprised I’ve not seen any of the “it has a hole and leaks if you tip it over “ comments though as they seem rife on other detailers channels.
Keep up the great work and excellent content 👍🥃
Hey you didn't mention the foam dwell time.
ОтветитьIf you’re using a foam canon and regardless the thickness you’re trying to achieve. If you’re letting the soap dry just put it away and go back to a bucket.
ОтветитьDo not buy MJJC cannons, Period!
ОтветитьWell…. Use a cheap useless foam cannon for presoak and this one for real thick shaving foam
ОтветитьSurely you'd dial the lance dilution, product ratio back to suit your requirements. I don't own an MJJC but surely I'd get it to work for me. I don't thinkmthisnis a very good comparison or review and down to user error.
ОтветитьYou can adjust the regulator to lessen the thickness.. it may affect the PIR, is it?
ОтветитьTbh i never contact wash with foam, i’d rather use a bucket wash for that, foam makes a mess when doing a contact wash and its a waste of product. Similarly i use my prewash foam in an ik foam pro 12 with about 2L of solution and can go around the car multiple times while only using a fraction of what i would use in a foam cannon
ОтветитьIt’s built like a tank it over thickens everything way to much air in the mix and as you say Adrian dry foams don’t work 🙌🏻
ОтветитьVery interesting illustration here! I have noticed sometimes foams can be too dry but this really highlights the nuances of it. I do lean towards thicker, drier foams, here in Southern California we rarely get clouds, I constantly work in direct overhead sunlight at noon.
Something I’ve never understood: I’ve used BH Autofoam & Touchless for years. I never got the thickness that you got with BH auto foam. Sometimes I fill the bottle 40% soap & 60% water and only get mildly thicker suds, still a runny recipe. Touchless always came out thicker, Alex Auto Wash also comes out shaving cream like. I use a kranzle 1622TS. I hear people using 10 ML’s of soap to cover a whole car I’m flabbergasted.