Комментарии:
What if it keeps leaking slightly after you’ve turned off the water under the sinks?
ОтветитьI'm having issues getting the colored circle removed.
ОтветитьThank you so much 👍
ОтветитьHe should clean the area before put a new O-Ring
ОтветитьThere are channels with no teeth.
ОтветитьBuy a pair of 440 channel locks.
ОтветитьWhat size were those O-rings you used? Asking for a friend. Totally don't have that same faucet.
ОтветитьGreat DIY video. May I ask what size of O-ring did you use? My faucet is a Thai brand called Hang. I need to order the O-ring online. When I measured the outer diameter from the outside of the chrome sleeve its 135mm. O-ring inside mabe 130mm. Does that sound right?
ОтветитьWhen trying remove the neck and its stuck whats the best thing to use to get it unstuck?
ОтветитьAlways cover the sink drain hole to prevent anything, screws, etc from falling through.
ОтветитьThe only thing stopping me from fixing my dang sink is I can't pop off that lil cover in the beginning 😭
ОтветитьTHANK YOU FOR THE VIDEO
Ответитьthank you lot's.
ОтветитьGood stuff. 😎
Ответитьjust did this, it worked like a charm. thanx!
ОтветитьDamn this video was so helpful! Only problem is I didn't read before diving in and my leak isn't at the base 🫠😆🫣🤦🏼♀️
Wellll...I know what to do for this kind of leak! Now I need to fix a drippy faucet 🤦🏼♀️ drippy was the correct word damn 🤦🏼♀️🤣
Thanks so much! You saved me a bunch of money for a surprisingly simple fix
ОтветитьWow, that is thin stainless steel. You can see how it flexes. My sink is from the 1970's. They used thicker metal back then.
ОтветитьReally appreciate the links to the O Ring set and grease!
ОтветитьAhhhh....you just saved me a bunch of money.
Thanks SO much for the instruction! 😊
my handle will not come off
ОтветитьStep 1: Put the plugs in the sink!! What can I say, I'm clumsy!!
ОтветитьI have rust coming out of my mind like a plugged up do I have to change the hole faucet
ОтветитьWhat if it’s leaking from the base ? 😩
ОтветитьGreat video! BUY LOCAL from your hardware store and support their business.
Jeff Bezos, owner of Amazon has enough billion$.
First Step INSTALL DRAIN PLUGS !
SO PARTS DON'T DISSAPEAR ....
LIKE THE RED/ BLUE CAP....
Don't waste your time, replace the whole thing.
ОтветитьToo slow
ОтветитьBob dylan
ОтветитьCouple extra tips:
1. A pick works better than a screwdriver to remove the o-rings. Less potential damage to the groove and easier removal of the o-ring.
2. Silicone in the groove BEFORE re-installing the o-ring allows better silicone coverage.
3. Soak the chrome parts (spout, retainer ring, etc.) in vinegar to remove the scale and deposits so it looks better and functions better. Any scale left inside the spout where water has been leaking past the o-rings will tear up the new o-rings faster.
What about water drip from the faucet
Ответитьseriously, this is terrific ~ thankyou
ОтветитьLife saver! Thanks. We have same model. Will be doing this as soon as I buy the silicone grease, the rubber rings, and the sediments filter mesh or whatever it's called (ours broke...)
ОтветитьYou have replaced the good ring seals but didn't replace the top one that caused the leak 🙃
ОтветитьWhere to buy parts?
ОтветитьThanks... I was thinking it might have been my cartridge. If the product is Moen they have a lifetime warranty so you can just called up Moen and they will ship you the part you need for free.
ОтветитьWhat kind the material or name tube (white and blue) he have push on while o ring push already?
ОтветитьThank you Roscoe!!!!! I could not afford a new sink and I found a cheap little pack of various O rings at a flea market fix it guys stand. It has the ones I need! And I am not plumber efficient. LOL But I can do this. THank you so much
ОтветитьFingers crossed our replacement goes this easy! Off we go!
ОтветитьThanks. I have the same model and after 40 yrs of use it’s starting to leak around the base. I have seen some people push up the handle as they run the water and that is a No No. Release your hand from the handle when the water is running. The pressure on the handle causes more problems down the road. Also put something in the sink tub like a cloth to keep small parts from falling into the drain. Lesson learned on that here. Thanks again
ОтветитьExcellent video ! But I can't help it, but I gotta say that for many, the fun begins when you start bending allen keys and the screw is seized !
ОтветитьThanks
ОтветитьVery informative and a job well done. Suggestion put a strainer plug or a small piece of cloth on the drain hole so to prevent something falling in the drain. Thanks again
ОтветитьMine only leaks at the base when the lever is in the hot position. Also, I do get a single drip every fiveminutes or so from the faucet.
Does the drip from the faucet indicate I need to replace the cartridge as well as the O rings or can I skip replacing the cartridge? If I need to replace the cartridge, do you have a video for that?
Man really hoped the kitchen sink would work with me like this 😢 the red portion I warped and stripped the inner screw. Any tips on solving this? Also my water wouldn't shut off completely have a drip going.
ОтветитьI have to work up the nerve to try this myself.
ОтветитьWhere you bought the ring Sir? I surely took the wrong career. I fixed my garage, my bathroom sink now I'll see if I can fix my kitchen faucet.
ОтветитьThank you 🙏 nice clean ❤tools ⚒️ 🧰☝️usually a few plumbers used rusty abused tools 🛠️ 👍🎥
Ответить