If you have a cooking oven you can also make dry carbon fibre parts. [DIY] (Making Engine Cover)

Great, you only need an oven.

And 12 chemicals, a polish machine, a 3printer, vaccuum pump and bags, and a respirator because carbon particals are nasty shit in your lungs

Those 3d printed parts proabbly gonna melt on the enigne

Engine covers are useless

Where did you get the resin hand pump from please mate?

Awesome! Resin needs a little heat gun to get rid of micro bubbles. That will cut down your sanding time. It also helps level it to make it smoother.

Anders nie był dobrym rozwiązaniem był by z nim ten sam problem co z pierwszymi krabami. Tak naprawdę bazował na starych rozwiązaniach co prowadziło by do szybkiej potrzeby modernizacji taki pl01 tylko bwp

I have a question. Every time you're applying an epoxy layer you have to use a new brush or just keep reusing the same one?

오븐이 없으면...인퓨젼?? 공법?? 이런거밖에 없나요?? 드론에 사용하려고 하는데요... 캐노피 같은데사용하려고합니다.

link in video is spam, and leads to Aliexpress.

What the hell is this? No vacuum while curing???? No air-weave or ANY airflow media??? Guess you don't want pressure on your part. A hand pump vacuum!?!??! A toaster?! Where the 1000deg elements are right next to PLASTIC!? Plastic covering the outside?!?!? This video has GOT to be satire? Nothing in this video is correct way to do this.

And how much for such a piece?

With dry (not prepreg) carbon there's no need for an oven unless the part will be exposed to high temperatures

Nice part, but lots of unused prepreg here. Better use tape to map out the surfaces beforehand and create a stencil with it. This way, you only use the amount of CF you actually need.

다른 만들기는 다 따라해도 이건 못따라 하겠다. 손이 진짜 많이 가는구나.ㄷㄷㄷ

Ни чего не понятно, но очень интересно! 😅

great video,but where is my Mpower

Why so many layers (legit question)?

nice job, thanks for sharing :-)

Is this master at work in side his house?

Excellent videos! Help me a lot What kind of towels do you use for cleaning the carbon parts? Thanks

Thanks for showing me that, now I know to never do it.

👏🏻👏🏻🤩

Where do you buy carbon fiber like this video has

u r cazy..

great job! that clear spray doesnt turn yellow\green with all the heat in the engine bay?

Good job, but perforated film is used for wet lay. Unperforated film is used for prepreg as the resin to carbon ratio is correct so you don't want to remove any of it.

Hello there.
I have a question
What kind of mechanism you use to remove the inside air from the bag?

녹이나서 구멍이 길게 난 자동차의 하부에 가본으로 덥을 생각이 있어 정보를 찾던중에 들르게 되었습니다. 뜨거운 열을 가하지 않고 철에 잘 붙게 하는 방법은 없을까요?

fiber water print cant waste time

❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Столько в пустую потраченного времени, ради декоративной крышки, которая не на что не влияет и которую даже не видно. Зачем?

I am late to the party but please, never laminate composites without gloves. And the term "dry carbon fiber" is false and misleading. Pre preg composites are pre impregnated with resin and then partially cured. But there is still resin in the material.
All epoxy materials are allergens which cause you to develop an allergic reaction over time.
I have worked with composites for nearly 18 years and have seen dozens of people become allergic to these materials over time.
Please do not use this material without proper PPE and stop calling it "Dry Carbon" even if some company markets it as such.

Since I've seen so much reaction on this video.. I'm looking for someone to make a motorcycle fuel tank and the airbox if interested please pm me with your prices.

It would be cheaper and less time consuming to pay somebody to do this.

Что за препрег использовался и какой плотности? И температура запекания тоже интересна

“You can’t eat at errybodys houuuuuse”

Уничтожил ///MPower!!!!!! Варвар.

Suché díly? Ony se daji v troubě vyrábět i mokré díly??

Can we request part. And if so would sell it back to me😅 97 lexus sc400 center console

Wieviel soll so ein Bauteil real kosten? $ 500?

ね、簡単でしょ？

I want to know what is the name of the carbon material used in it

You should not do the bagging like infusion but put the entire mold in a vacuum bag with absorbant material after the release film. And also keep vacuum during curing

Please, fix retracts on your ender 3...

Выглядит красиво, но меня волнует крепление нейлоновых ножек. У полиамида достаточно тяжело клеиться. Вы же используете эпоксидную смолу. Я пробовал также клеить издели из полиамида, только они были армированы стекловолокном. Результат был плохой. Все выглядело хорошо, но при небольшом усилии весь клеевой слой откалывался

Where do you buy the carbon I need to order some..???

Жалкая подделка а не карбон

Have you ever done something much larger, like an E61 panoramic sunroof?

Trop de travail juste pour une pièce comme ça et qui en plus ne se voit même pas car elle cachée sous le capot.