C87214 & C87030 Wireless Color Forecast Station Setup Guide

I have Model: C87030 and have always used the atomic clock setting but it shows an hour off. For instance, it's now 12:13 PM CST but the weather station shows 1:13 PM. Is there a way to resolve this with the atomic setting or do I just set the time manually?

Can I mute alerts

How do I get out of delicious mode?

Thank you for this video. I'm the idiot couldn't get remote readings for a year, because I wouldn't spend 5 minutes to find these instructions.

After 2 days with no sun the outdoor batteries are flat. Thse batteries have insufficient capacity and the solar cells far too small

Is there a way to make the time / clock numbers in white and not in the hard to see at night, green ? Thank you.

O207 rx

how do i set the minimum temperature?

Thanks for the video. Very informative, but didn’t answer my question. My outside temperature display is about 10 degrees warmer than the actual outdoor temperature. My sensor is not in the sun. It also shows low battery icon even after I installed new batteries. What suggestions do you have?

Hi, how to mute the sound when pressing the buttons? My dog's are going insane when they ear that clear sound. Thank you :-)

GREAT Video even to refresh my memory on how to use the C87214 functions I don't use too often or even just changing the batteries. One function you can clarify is if I set an "alert" and the "alert" does go off, how can I clear the "alert" icon on the display after I fix why the alert went off. Thanks

I do wish that there was a station that concentrated mainly on outside weather on the screen. They all split the screen equally between in and out. It's a weather station for outdoor weather. The indoor temp should be a small part, and the rest for outside.

Model ca86515

Own 2 lacross n have no problems n i would recommend buying a lacrosse temperature system

What do the beeps mean? My unit will beep 4 times about5 - 10 seconds apart.

My station doesn't have a model number so how can I find out what model is it. I bought it in 2017 or 18. My station will not pair to the sensor.

I am enjoying my new weather station. I have bought a new outdoor temp/humidity detector. How do I couple it to the weather station so it will, I guess be a channel 2 indicator?

I have a C84343 indoor outdoor thermometer. It is connecting to 2.4 ghz but will not configure with my phone. I have done a factory reset.

My wind and rain unit will not load ID number on the base station.

Can someone please just show me how to change F to C without making me watch some hours long video?

I have the 308-1414B and shortly after it's 1 year warranty expired one of the arrow buttons broke and I never pressed on it hard or abused the weather station, then a few months later I accidentally bumped it off my speaker that is not very tall onto a basement carpet and all but 2 of the buttons broke so now I can only see the low temperature of the day. When I opened it since it's warranty expired it did not have a high quality built look to it and the circuit board for the buttons was flimsy. It worked great before then and rarely lost communication with the remote sensor and it was easy to reconnect to it by holding down the search for remote sensor button.

EASY TO SET ONCE YOU LEARN HOW TO SET IT,...ITS A BREEZE.

Don't bother buying these clock-"weather stations" from La Cross...they suck! Pain in the ass to set...so many flaws

Great review. Thanks

Help please: Outdoor side is not working, just shows dashes as show on the video. Tried what was said however, it did not work.

Hi, my reading inside the house not equal although the out sensor beside it, how can fix this? Also can we upgrade it by getting the rain and wind stuff?

He wants to "sign" but doesn't quite know how!

Excellent video with the ability to go straight to the info you need.Solved my problem.Thanks

How about using the actual readout instead of graphics so that we can see what the unit actually looks like?!

Just wondering if the alarm can be used if temp outdoors falls below a certain degree if the alarm would work to indicate low temp

So I have had two of these units for awhile and just purchased a weather station as well. For these units, I have never been able to get the atomic time on either, yet I have atomic clocks that pick up the time correctly. There are no obstructions, etc. Are there any additional tips for connecting and maintaining the atomic time? Any known issues on that aspect? Also, you show in the video that you have atomic "on" yet you set the time. Could that be part of my challenge? Thanks in advance for your help!

Why did you discontinue this model and why do you charge more for the 308-1414B which has less features? You Can't turn off the Beep sound and it does not display the seconds.

ok cool. so the sensor don't have to get wet for the rain icon to come on? how many degrees does it have to drop for the temp trend to work?

is it ok to put the outdoor sensor under a awning ? will it still no when it rains?

Beeping stopped. However, I cannot get the Outdoor Temperature.

Don't waste your time, they're not that good being prone to software lockups radio link issues.

I cannot get my Forecast Station to stop beeping. Please help.

I purchased the C97214 a few months ago and found that the 'forecast' seemed to be stuck on partly cloudy. On contacting LaCrosse regarding the problem, they replaced the unit. This unit has exactly the same problem even after allowing 3 weeks for the barometer to settle. Is this a common problem?

I want to love this weather station I just got but the temperature has done nothing but be all over the place. I set up the remote sensor in the same locations as my acu-rite and my other thermometer. This one is always from 6-15 degrees off! I've followed at the instructions and even followed what they say to do in this video and it's still way off and all over the place. It was 62 at night here and Temps falling and this said it was 89 and Temps rising. I'm about to just return this thing. Very nice screen and everything but useless if the temp isn't even within 10 degrees difference. I guess I could brush up on my math and just deduct 10g1t degrees off of what this station says... Super bummed on this

?if i need the device only for in room temp measurement - can i leave the sensor not connected at all

love it.
i bought it today at a thrift store brand new in box with all the acsesories for only 3 dls but i would have paid full price if i knew it was this great. Go and buy it !!!

IS there a way to make it stay always illuminated?

Hi, supprot this model WWVB or DCF77 timesignal? I am from EU. Thank you.

I have the  308A-146 Color Weather Station how can I use just battery? I want to set it on a table and I don't have an outlet nearby.

Hi. I just connected the weather station and set it up exactly the same
as in your video. I placed the sensor just next to the weather
station(just for now) and could you explain me why despite that the
sensor is placed next to the weather station there is over 1 Celsius
difference between the outdoor and indoor reading on a weather station
display? I`ve been waiting for over 15 minutes now and it is still the same.
How can it be accurate after placing the sensor outdoor if it can be even accurate being next to each other?

Is the outdoor sensor water resist? is there any problem to place it outside in stormy days??

We are at the end of 2016 and you still have the 2015 model as a sample. Since you made changes, please change the tutorial as well.