Комментарии:
Can compressor start with no / low refrigerant?
ОтветитьProblem is your $500 a/c is worth about $250 and you may have a fire hazard since we don't know why the wire was melted do we or it may likely burn out again. Better just to move on to another piece of chinese garbage.
ОтветитьHeat shrink tubing....always useful and a nice finishing touch!!
ОтветитьJust so you know in many countries your not allowed to do any maintenance on airco units unless you are F-gases certified. this is due to those gasses being HIGHLY damaging to our ozone layer if they escape the unit.
ОтветитьGreat Great video man! I've looked and looked and couldn't find nothing remotely close till I seen this one... we have same issue same fan however I found out the the bottom fan that spins when condenser or compressor kicks on which gives the cold air, actually can't spin becuz its bar is so low the its sitting on the plastic unable to rotate so it's just hums. How can I tighten that bar and wheel up so that it hangs again and able to spin? For the life of me I cannot pry the housing apart or get wheel off even after removing nuts and screws.. can u help me?
ОтветитьThank you for the inspiration! I'm going to take mine apart tomorrow to see what the problem is. Hopefully it is something like this that can be replaced and not a coolant leak.
ОтветитьYou must be some kind of electrical genius. This is way beyond my abilities. I do not have the tools either. Wish there were small appliance repair services still.
Ответитьit’s so fuckin g hot and humid in my apartment 😡 I swear when I get hot every little thing annoys the fuck out of me!! Especially when you’re sick too ..Took mine apart but didn’t work and nothing I bought this for 800 dollars and def not trying to do that again
ОтветитьMy issue was a burnt 6uf capacitor. $9 at amazon. Part CBB61 on a KUL portable A/C. Thanks for the vid👍
ОтветитьLoved the video, excellent diagnostic approach, except for the flame, you should edit it out, or say "Do not do this" Use a heat gun.
ОтветитьDoes anyone know a link to the coil to this particular model?
ОтветитьI answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times.
78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways.
81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times.
88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders.
92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come;
and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified.
99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations."
102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75
////////////////
What is the temperature at the outlet of the air conditioner? And what is the temperature in your room now when it’s hot?
ОтветитьMe too. I would love to learn to fix more things
ОтветитьMost effective video. Like and Subscribed.
Ответитьhell yeah
ОтветитьYou do hvac for a living?
Ответитьa good replacememt would be the Potter Brumfeild T9AS1D22-12
ОтветитьThis is impressive work.
ОтветитьThat's the same exact part that burned up on my Rollibot Cool310 AC. Two days ago my AC stopped blowing cold air so I took it part and found this same issue. Except I didn't find this video until just now after I already dropped $100 on a board replacement because I couldn't find parts.
ОтветитьAmazing man thank you
ОтветитьSubbed from this one video, nicely done
Ответитьdont forget college fees
ОтветитьMine blows cold and the relay turns on when the machine starts it simply doesn’t lower in temp or go to the set temp
ОтветитьThis was so goddamn cool
ОтветитьThanks for the walkthrough and knowledge!!
ОтветитьThis is a great tutorial! I looked into mine and it doesn’t not have a burnt relay and the compressor seems to kick in but the air isn’t getting colder. I’m thinking the next thing to check is recharging the refrigerant.
ОтветитьI don't believe it's a one hour fix. Dismantling, getting tools ready, looking up the part and ordering, putting the thing back together, cleaning the work space and getting the tools out of the way, all this takes more than an hour.
ОтветитьTHANKS FOR SHARING ! Got 5 of these ! I can’t find repair service for units with expired warranties!
ОтветитьGood diagnosis and repair. Cheers! If the same thing happens again, you could upgrade the relay to a contactor which can handle higher current. The only caveat is the contactor would be remote mounted with wires soldered to the board to run to the contactor.
ОтветитьAwesome video
ОтветитьCan you fix mine pls .
What state are you.
Nice video
I’m opening mine as we speak
Ответитьand this is for someone with money to spend. people with little to no money this is not helpful at all
ОтветитьOne thing you need to wonder about is why the relay burned in the first place. So good find, great part price from China... Is the relay going to burn again? :)
ОтветитьChina
ОтветитьCOOL
ОтветитьThey really REALLY need to make these easily rechargeable by the end user or at least an auto-shop or something. It's ludicrously wasteful how many of these expensive units get junked when the only thing they needed was refrigerant, but that's modern capitalism for ya....make trash products that don't last and are far more difficult than necessary for the average person to repair.
Ответить$5 part plus $80k worth of technical knowledge and tah-dah; done.
Ответить@redneckoriental. Hey, do you know by chance where to get blower wheels for Portable Air conditioner? 7.5" x 3.375".
ОтветитьOr does anyone know? Where it doesn't cost alot
ОтветитьIf I see a portable air conditioner sitting outside the sidewalk. I'm taking it and keeping the motor and the power supply.
ОтветитьWould have used another flag terminal as it would have put less strain on the connector. Bet it was loosened over time due to vibration leading to a poor connection through stretching and thus heat buildup and ultimate failure.
Ответитьwish mine had been an easy fix. mine apparently is the coolant, as I can't find anything else. But the pump kicks in. I also don't see any oily residue, but I did find a little green corrosion on top pump and by one of the rads.
Ответитьcheers same problem now working
ОтветитьWhich to wires did you connect please in order to see if the compressor kicks on?? You did not show in your vid. I'm having the exact same problem but my relay looks normal.
ОтветитьThis was great. And you know what i always do, if i cant fix something like this? I find parts on ebay for it that sell often, and i take them off and sell them. You can sell 5 or 6 things that people like you buy and get $100-200 back. I partsed out my samsung dryer when it failed and have made over $160 so far with several parts to go still. And ive made enough on 2 broken vacuum cleaners to buy 2 or 3 brand new units. Some equipment i sell gets me way more money than the price a new unit would cost. Just has to be high demand items, and just junk or scrap the rest of it.
ОтветитьWhat about when they stop making hot air? We bought one that does cold and heat and the heat won’t kick on. It’s only a year old.
ОтветитьSir can you reiterate that video so I can better understand it? I'll send you mine.
ОтветитьOk so I’m looking for answers, anybody help. I have a costway portable air conditioner and my compressor would kick in for about 15 secs then it would kick out and give me the E5 error code i tried to see if was any damaged wires on the circuit board but it’s none, i checked to see if any wires was loose and their wasn’t. Any information would help please.
Ответить