A Worth Replacement To Bosch’s 4100 Series?? || Bosch GTS15-10 Table Saw || Full Review

On these reviews, how many amps is the circuit you are plugging into? My Skil 6703 is pretty nice but it kicks my 15 amp circuit in almost every cut. I have to tap a 20 amp circuit from the kitchen to get around that.

So if you had to choose, this saw or the Skilsaw SPT99. Asking for a friend😅

Great video. Would you be able to tell me the difference between this saw and Bosch 4100xc saw? I have an opportunity to buy a 4100xc on sale. However, I want to buy the best out of the 2 saws. Thank u.

Lol.. Not even close! The DeWalt took that crown a long time ago!

Great review! Really happy I bought this saw as a result. Tape is an issue, but I’ve seen that on a lot of saws in this price range, the rest of the features more than made up for it. We can fix that with aftermarket tape

Great review! Really happy I bought this saw as a result. Tape is an issue. I don’t have space for a cabinet saw, but this is a great little machine. Various after market improvements and customizations can make it nearly perfect

New to the channel and great reviews. I like that your reviews are always letting "us" decide.

My beloved Bosch 4000 just died after 17 years and have been debating whether to fix it or replace it.

Would love to see a shootout between this Bosch, the Skilsaw SPT99-11 and DeWalt 7491RS. These three seem to be the cream of the jobsite crop right now.

Interesting that DeWalt has dropped the price the past few weeks across the board (HD, Lowes and Amazon), I wonder if they are feeling it or if they are going to be releasing an updated version soon.

My black horse pick (or is it green horse?) - I'd like to see the Metabo HPT C10RJ reviewed.

I think youre throwing the tape measure off by squishing it with clamps.

I’m torn between Bosch GTS15-10 and Dewalt DWE7491RS. Will you be able to do a side by side comparison between the two?

I’m looking to get into woodworking, I want to try to make chairs, small to medium sized tables, and other similar projects, would this be a good table saw to get? Never owned one before

I have the older model and I don’t know how to adjust my fence. It’s always cricket

In 2007 I got the Bosch 4000. In 2019, all the smoke escaped from the motor, along with all the factory-installed sparks and flames. I wasn't able to capture them and put them back, so I replaced it with the 4100. Now after seeing this saw, I'm tempted to clean up and sell the 4100 (still in very good condition) and replace it with this. (I also have the 18v cordless model.)

👏👏👏

Width table saws such as the Skil hovering below $400.00, I think this table saw would be a hard sell except for Bosch enthusiasts..

Your attention to detail is awesome.

Nice saw. Hope they make a European version soon!

I bought this saw today after having to return two DeWalt saws with damaged fences 😢 Im happy everything on the Bosch was set up perfectly from the factory, no damage and it cuts great. Thanks for the review!

What are the dimensions table/carrier frame when setup.

Where do you get arbor nut/clamp or dado kit. I can’t find it What is nut part number? Insert number is ts1014 but no nut or clamp for larger stack

Great review video. Looks like though Bosch is competing with Skill for the loudness wars. 😂

Why on earth does Bosch build completelyx different proiducts for the US market than germany?
That rack & pinion was dewalts master move, now bosch has it.... for US only

My saw sounds really rough on start up and it's new

Your reviews are the best I've seen. They are very fair, get right to the point and are not overly wordy. Thanks so much!

I Bought Me A Cordless10 Inch Brushless Ryobi For Only $356.23
& I've Had It For A Year Now
& It Works Great. I'd Never
Buy A Corded Miter Saw Again.

If this saw had a built in dust collection (overhead and under) with a bag, I would be sold. Sirocco dustless 10" is amazing, but does not have the soft start nor 4 extra degrees of bevel options like this Bosch.

So please which one should I get the Bosch or the DeWalt great video

Thank you for this excellent review! I was in the market for a new small table saw in my shop since my Ryobi bt3100 died. I am now the proud owner of this Bosch GTS 1510 table saw. I've been using it for the past few Weeks and find it to be an excellent and accurate tablesaw. The one thing that I am not too pleased with is the sliding miter gauge which fits poorly into the track. As a result, even when the gauge is set accurately, there can be enough lateral movement to cause inaccurate cuts. Has anyone found this to be the same? Or maybe more importantly, has anyone built their own sliding miter sled for the saw? I'd be interested to know what design plans are out there.

I havd one serious problem wiyh these saws and its not just the bosch. It looks like the rise and fall mechanism for the blade is the same as previous saws and is just as exposed, these jam up with dust and get damaged, i have one at at the moment that is unusable. this is a massive problem that should have been fixed.

Pulled the trigger on this for a number of reasons: 1) this video (high five!) 2) my Bosch 4000 died after 15+ years of quality use 3) I had been looking at the SkillSaw Wormdrive and the Dewalt had been on sale everywhere for $550 and was about to go yellow when... 4) Acme was running a sale when you added this to the cart and undercut Dewalt by $50 (yes, the Bosch was $499)! Got it this week and bought the accessories with the savings (rear outfeed and left side feed - which Bosch says doesn't fit, but it totally does - you just need to mount the receivers differently).

On adjustments - I did have to move the back of the fence about 1/16" but the rest was aligned.

Finally, had a use for a today and WOW. I didn't know what I was missing. Start and stop was great. Motor had a ton of power (ripped down some PS 4x4 in one pass on the stock blade and some composite deck boards) and the rack and pinion was so nice to micro adjust.

On other thing, the Gravity Rise table is an upgrade over my old one. Seems slightly more compact and the airless tires are huge - I genuinely disliked having to pump up the old ones.

Plan on upgrading my blade (did burn the 4x4 a bit, but for this project didn't care too much) and getting the dado kit shortly when I have a need. So far zero point zero regrets.

Last thing (for real) - tape appeared OK for about 10", then starts to be off. Will stick to my tape measure.

I just bought one and set it up, it sounded rough on start up, took it back ordered another and got it in yesterday, plugged it in and it sounds rough on start up. Is yours that way? I tried to listen closely but I couldn't tell.

Love your pink screwdriver. I have one with flowers on it.

Such a great review
Could you do a comparison with the Skill 10”?

Mike maybe it's time for a Head to Head Bosch vs skilsaw ❓🤷

I'd give it a 9.5 out of 10 and your video a 10 out of 10. I wish you had shown all the extra-cost options for the saw. It's a shame the saw isn't wired for 220 volts. Bosch should include a USB thumb drive with a video on how to assemble and adjust the saw. Your video would be an excellent place for them to start.

nice job

Great content Mike. The stand on the Bosch gts15-10 seems like a step back for Bosch. What do you think of the stand compared to the older 4000 model?

Bosch GTS 15-10 or Dewalt 4792. Which is a better choice?

I have a 4100 and have really enjoyed it. My only problems I have with it is that after cutting for a good while I have to stop, remove the blade, air blow out the 2 rods that ride the blade up and down due to the fact it keeps locking up and I end up stripping out the screw on the raise and lower wheel. After I blow it out, I spray the rods with a lubricant, which by the way is recommended for woodworking saws. But after another month of cutting I have to repeat the process all over again. I also have the ruler being off issue. I am considering getting rid of this 4100 and getting something better. Love your review.

Ive used this for about 5 months doing wood flooring, i would never go back to dewalt.

Where do you buy that special arbor but to run a dado

I have the 4100, and like it for the most part, I definitely wish it had the rack and pinion fence, I am thinking of selling my 4100 and buying this one, I was hoping that this one would have better dust collection than the 4100, since it looks like the blade shroud underneath does not have so much open area around it compared to the 4100. do you think it is better on this saw?

Just recently found your channel. Thanks for all the info on tools you've covered. Can you or anyone else help me with the folded dimensions of the Skil SPT99? I stand my old Craftsman up against the wall when not in use and wonder if it will fit in the same hole, especially how far out it sticks with those wheels. Thanks again.

What's the cause of the blade runout? Bad blade of bent motor shaft?
Do you know if the original extensions will work on this saw? Also, the stand looks a bit flimsy compared to the previous one. ??? I love my 4100 so it's not obvious if this new model is an 'upgrade' or not.

Dewalt is a white label company they don't design or manufacture anything it is all out sourced, this new saw looks remarkably like the Dewalt DWE7491RS.

I bought is saw, assembled it today. I also sold my 4100 today, if I could redo it I would have held off on selling the 4100 to see if it's stand GTA47W was compatible with GTS15-10. Whilst assembling the stand nothing lined up most of it had to be pushed to bolt it up, the bolts to attach the saw didn't line up either. The hardware was abnormal lengths with moving parts on threads. I believe the same Taiwanese manufacturer Dewalt, Delta, harbor freight and others use, manufactured this. This is nearly a perfect replica of the Dewalt DWE7491RS.

Terrific video, I was looking for a new table saw and watching you review saws made my choice easier; I am going with the Bosch GTS15-10 table saw! Thank you!👍

Great review. So what’s the best corded portable tablesaw you would recommend?

is bevel manual adjust or gear driven?