Комментарии:
thanks,i really needed to know if i could swap a 260 with a 370,,,,very helpful
ОтветитьHfu
ОтветитьYou guys need to change the socket to atleast xt, short the switch and adding one more esc chip (MX2877) wich can be soldered directly on top of the old chip. I've done mine and it has absolutely no electrical issues.
Ответитьnice work~! thanks your Tip !
ОтветитьNice simple and good video. 🎉
Ответитьhi bro is your d99s is working properly because my one's reciever board is not working is there any problem in between motor and reciever board
ОтветитьDo is your car working properly without any board issue
ОтветитьI just ordered to replace the motor of my wpl c24 2 speed gear with your black motor. And I use 30a Esc. But I saw that high speed 370 black motor burns 30a esc. Is your esc still ok?
ОтветитьIs 390 motor applicable too?
ОтветитьWhat is the size if the original engine? 260?thanks
Ответитьwhats esc you use?
ОтветитьWhat motor rpm did you buy? I have a 370 motor for wpl d12 but it doesn't have power down low it can't even move its weight. I probably bought the wrong 370 motor for my mn99
ОтветитьVery nice!!
Which gear box is better? The metal one or the stock?
Ok for mn d90? All stock ok?
ОтветитьCan you throw that motor in a 2speed gear box ?
ОтветитьCan I use the 370 motor on a 110scale rc crawler chassis
Ответитьi just upgrade my MN99s with 370 motr + metal gearbox
but why the speed is so slow, i see your video dont upgrade any electronic parts like ESC, but why my RC is so slow
Torsinya gede ga?
ОтветитьHey bro i wanted to ask if it was safe to upgrade my fully stock mn 99s with a 370 motor and have no issues?
ОтветитьThanks for the video!
ОтветитьI just got the DEERC version of this and it can't even push it's own weight up a hill. I get to a tough spot on my course and the battery cuts out and the lights start flashing like it's too much current or something. Did I get a lemon or is the stock setup really that weak?
ОтветитьGreat video. So it is better to use a 370 motor instead of a260 as an upgrade ?
ОтветитьAre you using standard 2.4g esc for 370 motor?
Ответитьcan this be applied to mn78? and share the link for the 370 motor
ОтветитьWhat size tooth was the transmission by chance? Or possibly the size of axle the motor has??? Please would help greatly in my choice of upgrades
ОтветитьHow is the stock esc after installing a 370 motor? is it still working?
ОтветитьApakah itu motor 370 strong magnet?
ОтветитьPlease what esc to use for this motor. Thank you
ОтветитьHow did you guys takeoff the pinion gear of the stock motor? I tried so hard that I messed up the old motor and still wasn’t able to get it off:\
Ответитьdid you replace the electronics too?
Ответитьİts A 260 Gearbox?
ОтветитьWould upgrading battery to higher amp will result in more power for the 370 motor?
ОтветитьDo you face any probs by changing 370 motor ?
ОтветитьNext step new gear box.
Ответитьcan the stock receiver power it up sir?
ОтветитьDo you have a link where I can buy it? And do you have a different servo in it? And what battery do you have?
ОтветитьHow buy for india 😭
ОтветитьHi there, which motor did you buy? the aliexpress link has 2 options. the D12 motor or the 2 speed motor
Ответить370 strong magnet in electronic stock? It's not recomended🤔
Ответитьhow long this engine can work? my brushed 390 died after 45 minutes
Ответитьhow speed is it
Ответить귀여운 차량 잘보고 갑니다..
구독하고 가요
I found out that your channel are absolutely interesting,keep it up mate
ОтветитьTahan air ga?
ОтветитьIs it waterproof? And do you have to solder?? Also can I have a link for the cables you used??? I subbed :)
ОтветитьWhich one did you buy?
Is it the 2 speed motor?
Done this on mine, other musts are oil shocks and mounting the servo on the front axle with a kit which removes all steering bump and angle!
ОтветитьThanks bro 👍
ОтветитьAmazing video bro really like that ☺️👍👍
Subbed ❤️❤️
Sis, I want to ask, I'm upgrading my 370 motor, how come if the road starts to die, the mn98 cars are all original. what is the solution
Ответить