How to fix a BROKEN DOOR HINGE on a Bosch varioperfect washing machine (or replace it!)

I wish it just had screws.

Great video broer. Having same issue, will try it out.

Thank you very much! This fixed my problem! Incredibly helpful!

You saved my life ! Thank you

Great vid. No stupid music, just clear concise instructions. It’s helped me

Really helpful, thank you very much!

Brilliant video so clear & understanding

Great video repaired the door hinge following your video used some 6mm brass rod i had ,threaded it with a 6mm dye drilled the hinge block with a 5.5 mm drill and tapped the hole with a m6 tap screwed in and put a dab of threadlock on . Jobs a good un

Thanks Sir!!!

How to take the door apart was what I needed to know. I'm planning to fix a friends dryer door, and it's a very similar Bosch model. The catch on the door has snapped, and the part I need to replace is that whole inside part of the door. I've ordered the replacement, but I needed to know how I would get the thing apart to fix it. Thank you so much for posting this. 👍︎

Thanks this is what i needed. As a woman i did it al by my self.

Thanx a million mate. The video really helped me and save me some cash. I'd cut some cardboard strips and placed it over the clips to get the outer ring off. Awesome video.

Brilliant video! The whole snap thing does my head in. It always feels to me like the plastics will be weakened when you've had to prise them apart, and it annoys me no end that companies now seem to go out of their way to prevent competent DIYers from servicing their own appliances. Thanks so much for posting this!

A quick advise for everyone who will need to remove the frame. Don’t lay the door on the floor like in the video because the snaps will snap back because of the weight of the door. Instead hold the door upright with one hand and pull back the white frame a bit and then losen all snaps with a screwdriver with the other hand, will take you one minute only and you will not scratch the door because you don’t need any force

After 4 hours of searching, you saved my skin, thank you so much dude

Thanks so much, I was able to change it. Best wishes from Australia!

Thank you very much from one Irish man (living in Vienna)to another. This was the help I needed. This is a case of built-in obsolescence by Bosch and the door casing is constructed to make it as hard as possible for amateurs to dismantle. But gratefully you showed us how to do it. Thanks a lot!

Wow didnt even know Bosch made washing machines 😮

Thanks so much for this! I've been looking everywhere to find out how to disassemble the parts of my Bosch Tumble Dryer door, which also has a broken hinge and no screws, like your washer. I was told I needed to order a new glass door which included the hinge. Sadly I've already placed the order, but at least this will mean I can take off the plastic front glass and ring from my old door without having to buy those too.

Hi thank you i have seen your video then i have changed my washing machine hinges you have explain very well. Thanks

Thank you. It helped me a lot.

Thanks! Finally found a video that showed me how to remove the casing. After this it was quite easy.
I only used one screwdriver to loosen the case. Tip: at the position of the click-system just pull the case to the outside with the screwdriver.
Thanks again for your helpfull video!👍

Thanks a lot for the video. I also managed to fix my bosch-hinge! It looks like a common problem...😏

Thanks great video I was really worried about breaking the casing but this gave me the confidence to get it done

Thanks for the video. Door hinge is now replaced and I saved at least 100€ for doing it myself.

Thank you for the video, my washer door is now fixed 👩‍🔧

Thanks a lot for the vid! Saved me brute forcing or breaking the cover when removing it. Now just waiting for the new hinge to arrive. Keep up the good work.

Me has ayudado dos veces a arreglar mi lavadora con dos años de diferencia ❤

Cheers fella £15.97 for new part and fixed new hinge to door, and diy is not me

THX FORM TURKEY👍👍🤲🤲🤲🇹🇷🇹🇷

I have bought a spare part from internet but it turned out that it's too small, I couldn't close the door, so we just removed the broken knot from the plastic not, and we drill a little bit of hole, I inserted the broken knot half way in the plastic knot and we attached it in the hole that we drill, so now it holds. I just hope I could return the one that I ordered

Wow…..thank goodness for this video. 60 F just changed my machines hinge 👏👏👏. Total cost $25NZ rather than paying a call out fee and parts and labour. Result 👍👍👍

You're a star! All other videos I've seen had doors with screws on the outside no good to me, my door is like yours, had no idea how to get into it! .. thanks so much for this video, much appreciated 👍

Came to see what happened to my door.. I have exact same part 9000901411 broken on my door in exactly the same fashion but on top instead of bottom.

THANKS BOSS I'VE JUST FIXED MY INNER PANEL WITH HELPING FROM YOUR VIDEO I APPRECIATE ❤

You legend. Managed to make a temp repair on a Siemens machine (same door) after watching this. You hero

The hinge broke in my machine as well (and, as I see, this happens quite often. Is zinc really suitable for this application?) The first thing I did was to try to fix it myself but ... no screws!, Thanks to your tutorial I saw the way how to do it (let me recommend chisels instead of screwdrivers, they are "stronger"). Luckily, the local branch office had the spare part and I picked it up myself. Finally, we were able to put our next laundry same day! Thanks🙂

Thank you from this!!

Thanks for the help

What torx screw driver is this ? T5?

I put the door on the carpet and pulled inelastic trim out with the tip of my fingers
It popped out very easily

A big thank you 🙏🙏🙏

This video actually helped me a lot in getting mine fixed! It was the large black plastic surround I needed to replace as the hinge locating pin had snapped through it, making it drop and not sit right when open.

I only needed 2 flathead screwdrivers to get this off though, one to act as a placeholder in opening the gap up and one to actually loosen the clips. Easy enough. Whole process took about 40 mins.

Cheers!

Cracking video loads of clear detail. Could not of asked to find a better one.
Thanks

Thanks for clear and usefull explanation to repair and fix it!

Great tuition. Thanks for sharing.😅

Thank you very much, thanks to the repair of 20€ I saved 600€. I only got it done thanks to your tutorial. Send me your Patreon link and I'll send you a tip.

Brilliant! I don't think Id have been brave enough to unclip the white surround for fear of breaking it. Just fitted a replacement hinge in around 15 minutes. a little fiddly but great advice with multiple screwdrivers hold the clips.

Anyone know what the plastic square part is called. We lost one during repair and I can't find a replacement

I am on my 3rd hinge broke in the exact place after one year sompart out of warranty - very frustrating as seems to be design/manufacturing fault in the parts - £13.95 is cheaper than buying a new washing machine but really Bosch should be covering the cost