Комментарии:
solid fix man! appreciate it, stopped me from hours of messing around with adjustments and diagnosis. Went straight to the set screw and tightened it. Thanks brother!
ОтветитьHello, I have a problem with my left arm. I can't turn or move forward or backwards. My right arm is fine. Could this be my problem? Those square bolts on mine look like they are equally apart. Should I tighten my left one? I'm not leaking no fluids
ОтветитьGot that same mower boiler hydraulic hose when he was trying to pull something replace the hose and it still won't go forward or backwards or backwards
ОтветитьGood job great video!
ОтветитьThank you for the information and knowledge
ОтветитьThank you! Glad to know some one is putting this information out there. Well done!
Ответить“I wrote the book”
Ответитьhow do you adjust the tension of the steering arms? its too tight and ams will not return to neutral without pulling them back?
ОтветитьWe have the issue on a z4200 toro so it's hydrostatic
ОтветитьVery Good!... #78 ✝ {5-27-2023}
ОтветитьMine is definitely doing this 😊
Ответитьgreat vid, Concise and to the point . No BS and annoying music TY
ОтветитьMy new time cutter my ride drove me off a hill. I was making a right turn, never broke traction, would not steer right and went straight while I was on the handle to make it go right, in turn, took me down a hill and off an embankment. I was able to fall off the machine and thankfully didn’t get hurt bad, and the mower, it’s messed all up.
ОтветитьHave you ever seen a brand new mower steer the wrong way while your on the handle directing it to go a particular way?
ОтветитьMine is losing right steer while having vibrations on that side. It only happens when hot. Any ideas on what it might be?
Ответитьtoro time cutter turns on, when i try to move forward or backwards, no response, feel hydraulic pressure, checked drive belt. could it be these screws that are loose as well? thanks
ОтветитьYou are the MAN! The nut on mine had vibrated loose and was gone and the bolt was lying on the deck. After I replaced the nut it is good as new! I could be of on a wild goose chase had I not watched your video! Thank you!
ОтветитьWe have this problem but only after our Toro has been running for about 20 minutes. We turn it off and let it rest for about an hour, then we get another 10 to 20 minutes of use before the problem shows up again. Any suggestions?"
ОтветитьGood video! Sometimes it's the simple things that get overlooked! Appreciate the tip! I'm going to check mine. Hopefully that is the problem. I was thinking that it is probably a lot worse, but maybe I'll get lucky and this will fix it! Thank you!
ОтветитьHey! Not sure if you will see this, but you seem very knowledgeable in the mechanics of this particular tractor. I have z500 Zmaster Toro commercial and my left side has lost a lot of power but it still works ( backwards is almost nonexistent -forward is decent) can still control the tractor. Does this sound like a pump issue, adjustment issue? My hydraulic pump has a fan in front and I have a seller who has the same model toro but the hydraulic does not have a fan in front. Do you think these could be compatible - my hydraulic is 116-2445 and his is 103-2675. They are almost identical except for the fan in front of mine, do you think I can exchange the two? Or do you think there is alternative method that could help boost power on the left side? My steering is some what like you described, less power on my left (at one point it got stiff and liked to move after in neutral) and more power on the right. I really hope it’s not an hydraulic pump issue
ОтветитьI have a new to me rig and if I push the right side forward I can let go of it and it stays forward until I pull it back. The left returns to center but not the right. I can let go of it and drink a soda while steering with the left. Haa
Any thoughts? Toro