S120 PON NETWORK RESOURCE ANALYSIS testing video for OSD function 1

Before testing, connect the device in series to the PON
network line. Press the “OSD” button on the keyboard to
enter the OSD test interface. Press the “OSD” button again
to test the ONU status. After testing, the corresponding test
result will be displayed. If not in test state, you can press
“ ” button to return to the main interface directly. In test
state, you can press the “ ” button, when complete the
test and then automatically return to the main interface.
Note:
1. During the testing, the status of the RUN light is always
on or off. The status of the RUN light is flashing if it not
in the test state, you can judge the OSD test is complete
or not according to the RUN light status.
2. Clean all fiber interfaces with a cleaning pen before
testing to ensure that all fiber interfaces are clean,
otherwise the accuracy of the test results will be
affected.
3. When the OLT fiber is not inserted to test the status of
None ONU and ONU No Power, two results will appear
at the same time, indicating that the OLT break, None
ONU or ONU No power.

Тэги:

#SENTER #SENTER_ST120 #S12O_PON_NETWORK_RESOURCE_ANALYSIS

Скачать видео