Комментарии:
Thank you, for tutorials!
ОтветитьWhy doesn't reaper just accept midi clock as a slave?
Ответитьis anyone else getting really impossibly unstable clock from Reaper? Renoise works perfectly...
ОтветитьHello everything is fine? I did the Sync between 2 Reapers, but when I stop Machine A, Machine B continues playing... to solve this I had to use an external midi device to be able to stop Machine B together with A. Using the Space bar from Machine A to B does not stop, it continues playing. Thank you very much in advance for your attention.
ОтветитьWill this work with the Mpc Studio MK2?
ОтветитьExcept that Reaper is actually sending Midi Clock under these conditions and NOT sending MTC
ОтветитьHi Kenny, I want Reaper to control external midi devices, but my midi output devices aren't being recognised by Reaper (they don't show up at all in the midi output device list in preferences). They are recognised by other software just fine. Any ideas on how to fix this?
ОтветитьThx Greetz from ffm germany
Good vid,on point no buhlshiat! U helpdesk me a lot.
Thanks!
ОтветитьHey Kenny, thanks a lot, this is a great video, I think you have a good voice for this
ОтветитьThanks Kenny ,I did learn something 👍 It suites me to record audio on two ancient Akai DPS 16 and I have been searching for a time code sync solution for months . Long story short you provided the sync solution . I keep all my audio flows on digital , and will now record all audio from Reaper across 32 tracks on the Akai devices then mix down in reaper …will let you know how that goes..top job as usual ..you get my my much coveted Blade Lunner award……thanks ! 👍🙏🙏🏿🎩✨🦄🫡
ОтветитьHey, this is really good. Thank you. I struggled to sync my unit, its a sdrum drum machine pedal. I don't think it's capable to send clock messages to reaper. I've been able to sync it to an external synth unit with no issue. Just not to the daw trough my audio interface. I'll keep trying
Ответить🔥🔥🔥
ОтветитьThanks for the video!! A definite help!!!
Appreciate all the videos!!!
when I press it comes out it always starts in the same place, is there a way to change that?
ОтветитьReaper as mtc slave on pc still not a thing in 2022...
ОтветитьI'm going to type
in the way
that kenny GAOIA speaks?
always in short
sentence fragments?
always with
upward inflection?
at the end of my
sentence fragments.
Your videos are informative but jesus christ is your upward inflection hard to listen to.
Thank you, Kenny! Your channel is the best! I tried to get a MPK Mini II as the Master, but I can't. Do you know if it's possible? (I know it can be the slave)
ОтветитьExcellent! Many thanks!!!!
ОтветитьHello
Sir I
have one question
How to render SMPTE track and cut SMPTE sound but sending a Singhal to light console.
how doo you figure out the offset the milisec?
ОтветитьTried this with a Korg Minilogue XD as the slave and it didn’t work. Want to be able to sync the Korg sequencer with MIDI drums made in Reaper.
ОтветитьAnyone succesfully do this with an Elektron machine? Elektron as master and reaper chasing tempo changes?
ОтветитьHi Kenny I have a question. I am using a roland mc 101 Machine. I want to record the Tracks in Reaper using usb. This works fine, but when I playback the Tracks, reaper beginns to slow down. This happens only when I use the Asio-driver of the roland mc 101. Do you have any recommendations to fix this? Thank you.
ОтветитьAwesome, thank you so much!
Ответитьhello KENNY GIOIA!Congratulations for your useful videos that I follow with great interest! I have a question to you or other users who follow you:
is there a way to make "reaper" and the drum machine move in an integrated way, together?
For example, if I go (or if I press play) to bar 5 does "reaper" or "the" drum machine "also go(or play) to bar 5?
Am using my the MPC3000, to slave Reaper it works but the problem is it doesn't start at the beginning and when, I push play or when ,I stop it .It doesn't go back to the beginning as well is there's something I need to setup in reaper to make it start at zero ?
ОтветитьKung fu keny!!
ОтветитьBut can I use a Korg SQ1 to control a software synth in Reaper? Vague googling says yes but no one says how. Could anyone help set this up if it's possible?
ОтветитьHow about using a Drumbrute to sync/control reaper? have issues with the transport not working correctly after doing what you described. Also can't change patches while recording, they just flash forever and never change. Any Ideas???? (also using USB to sync)
ОтветитьThank you very much!
ОтветитьHow do you program custom MIDI start stop continue or CCs in Reaper?
ОтветитьPretty useful video, even if you don't use Rape-er
ОтветитьThankyouthankyouthankthankyou!
ОтветитьKenny g! Yes !
ОтветитьYou're the man!
ОтветитьExcellent; exactly what I was looking for.
ОтветитьAs Bocio Marghe said a year ago, this video is Pure Gold. Thanks man! Beats anything else I've seen online or in the Reaper manual!
ОтветитьHi!
i´m trying to record a track using a spd-sx as a midi controller. I play and the reaper read all notes that I play but when I want to hear de result just one or two notes have sound.
Can you help me, please?
Thank you
All this master and slave talk is turning me on
ОтветитьKenny, I think there's a small mistake here. MIDI timecode is NOT MIDI clock. What you enabled in the MIDI devices settings was MIDI clock, which does not send ANY timecode; it sends only metronome-like messages; all those messages are identical. Timecode, whether SMPTE or MIDI or anything else, requires timing information actually encoded in the messages. It also sends much faster.
I'm having a problem trying to get Reaper to send MIDI timecode. The MIDI clock messages send just fine, but that's not what I need.
Hi Kenny. Been watching a lot of your videos this week as im looking to move my Daw over to reaper
As in this video I'm Working with an MPC renaissance and having an issue I hope you can help with.
Running the software as a vsti within reaper for the multi outs
I'm synced well and moving the playhead will also set the mpc to the same position for playback
My problem comes when I want to loop a section in Reaper to overdub on the mpc.
Reaper loops fine eg 16 to 24 however mpc continues to play the whole sequence through
Any ideas to point me in the right direction would be appreciated.
Hello Kenny! I’ve got an issue and I would like some direction to the best video for my need. I’m trying to hook my micro Korg to reaper. I can make a track that records wave form. Or I can record mini notes with no audio signal. How can I get those midi notes to trigger the korg auido? Ps I am daisy chained with my mpc. If you or anyone else could help that would be great! Thanks I’m advanced.
ОтветитьIs there a way to have individual tracks and not all sound through one individual track from my TR-8s
ОтветитьHello can this be used with the Alesis SR-18? Thanks
Ответитьanother great video, thanks!
ОтветитьReally helpful, thanks for sharing
ОтветитьNice one, will be trying this shortly, many thanks!
Ответить